This type of chain bucket gold dredger is composed by two parts. the first parts is sand and mud dredging systerm.This systerm use the square bucket to scoop the sand, mud and gravels up. Then the trommel classifier will separate the gravels first, when breaking the clay with the iron chain inside t

Here shows the alluvial gold processing flows for your better understanding. The flowchart is usually designed and configured as per your actual ore condition. Alluvial gold flow: trommel screen + gold concentrator + shaking table + gold sluice It's more suitable for the smaller and medium sized

Raw ores are feeded into grizzly feeding hopper by excavator and enter into trommel screen,with the operation and scrubbing by the high pressure water in trommel, ores with clays and silts was broken up,big coarse ore was discharged from tails of trommel and fine ore dischaged into jig machine via s

1.Feeding Systema. Streamlined design in Feed Hopper guarantees material can go into the equipment and be separated smoothly in case the material accumulates in the feed hopper.b. Grizzly is equipped on the feed hopper which can separate away the big stone bigger than 80 to 150mm. The use of grizzly

#1 Gold Trommel / Trommel Screen Function: to wash the feeding ore, and screen out most part of big size useless material (normally >10mm). #2 Vibratign Sluice Box & Sluice box Function: to catch gold particles by plastic mat when ore slurry flushing on it #3 Shaking TableFunction: for final separa